PCIe 4.0, 5.0 and 6.0 Explained: What Will You Notice?
What PCIe 4.0, 5.0 and 6.0 mean for GPUs and fast storage, and when a newer version makes sense.
From PCIe 3.0 up to and including 6.0, the speed per lane doubles each time: PCIe 4.0 reaches 16 GT/s, 5.0 reaches 32 GT/s and 6.0 reaches 64 GT/s per lane. An x16 slot with PCIe 5.0 reaches about 63 GB/s in each direction (theoretical). You notice it mainly with fast NVMe storage and with work that moves a lot of data between the GPU and the rest of the system; for a lot of everyday use, a lower version is more than enough.
The versions at a glance
| Version | Speed per lane | x16 slot (approx., per direction) |
|---|---|---|
| PCIe 3.0 | 8 GT/s | Around 16 GB/s |
| PCIe 4.0 | 16 GT/s | Around 32 GB/s |
| PCIe 5.0 | 32 GT/s | Around 63 GB/s |
| PCIe 6.0 | 64 GT/s | Around 121 GB/s effective (PCI-SIG quotes 128 GB/s as the raw value) |
PCI-SIG also published the PCIe 7.0 specification in 2025. Products with that version will only appear later; so look at what your motherboard or card supports.
When will you notice it?
- With NVMe storage that moves large files quickly.
- With GPUs where a lot of data is exchanged between the CPU and the GPU.
- With servers that have many GPUs, network cards and storage at the same time.
- Hardly at all in games and normal office work.
What to look out for?
The motherboard, processor and card must all support the version you want; otherwise the link falls back to the lowest version. The number of lanes counts just as much as the version. In Compare processors you can see which PCIe support a processor offers.
A practical example
If you put a fast NVMe drive in a motherboard with an older PCIe version, you will not get the drive’s full speed. If you put a GPU in an x8 slot instead of an x16 slot, you get less bandwidth. In games you usually notice little, but with work that involves a lot of data traffic you do.
So when choosing a motherboard, check how many lanes go to which slot and which version they support. This is stated in the manufacturer’s manual.
How do you check for yourself which PCIe version and how many lanes you get?
- Processor: look up the model in the manufacturer’s specifications. For Intel, the PCI Express revision and the maximum number of lanes are listed under ‘Expansion Options’. For the Intel Processor N100, for example, the page lists PCIe Gen 3 via the chipset and a maximum of 9 lanes. So a new processor does not automatically mean PCIe 5.0.
- Motherboard: check in the manual which slot works with which version and how many lanes are connected to it. A slot can be physically x16 and still have fewer lanes.
- Card or drive: look on the product page for the interface, for example PCIe x4 or x16, and the version.
- The weakest link counts: the version and number of lanes of the processor, board and card together determine what you get.
Which PCIe version do you need for your use?
According to Intel, all PCIe generations are backward compatible. So you can often put a card in an older or newer slot, but not every combination runs at full speed. The table below helps you decide what to look at.
| Use | What do you look at? | Note |
|---|---|---|
| NVMe drive | Version of the M.2 slot and x4 connection | A faster model needs a slot that can also handle that speed |
| Graphics card | Number of lanes (x16 or x8) and version | The difference is often small in games; check for data-driven work |
| Network card or expansion card | Lanes that are free after your drives and GPU | Slots via the chipset share one connection to the processor |
| Server with several cards | The board’s lane overview | Slots can drop back to fewer lanes |
With a server with many cards, that last point is extra important. It follows from how platforms are built: Intel describes that lanes from the processor connect directly, and that lanes via the chipset share a single connection to the processor.
Is a higher PCIe version also noticeably faster?
No. The table of speeds shows theoretical maximums. In practice, the drive, the memory or the software also limit what you notice. Of PCIe 4.0, Intel writes that SSDs show only small benefits in practice and that differences between PCIe 3.0 and 4.0 for a graphics card can be so small that you hardly notice them. A newer version can be worthwhile, though, to make later upgrades easier.
A low-power platform may also offer only a few lanes, and a board with many slots often shares them between the slots. So check beforehand that the combination of cards you want to use fits together within the number of lanes. A rule of thumb: buy a newer version because your work benefits from it or because you want to expand later, not only because of the number on the packaging. You can see which GPUs and processors support which version on GPUs and processors.
Frequently asked questions
Does a PCIe 5.0 card fit in a PCIe 4.0 slot?
Yes, the card then runs at the lower speed.
Is PCIe 6.0 already widely available?
That differs per product and you should check it per model.
How many PCIe lanes does my processor have?
Look up the exact model on the manufacturer’s specification page. It lists the maximum number of lanes, and often the PCIe version too. The motherboard then determines how those lanes are divided between the slots.
Further reading
Last updated on
