Overview with affiliate links. We receive a commission if you click through via us. Read how
Compare

Motherboard Specs Explained: Socket, Chipset, Form Factor, Slots

An explanation of socket, chipset, form factor, memory, PCIe and M.2 on motherboards, and how to compare them.

Blog5 min read

Short answer

On a motherboard, the socket and chipset determine which processor and which features you can use. The form factor determines whether it fits in your case. The number of memory slots and the maximum capacity determine how much RAM it can hold, and the number of PCIe and M.2 slots how many expansion cards and fast drives you can fit. Check the manufacturer’s list of supported processors.

The key specifications

The key motherboard specifications
SpecificationWhat it tells youKeep in mind
SocketThe physical connector for the processorA processor only fits its own socket
ChipsetDetermines which features and how many connections the board offersDiffers per generation and per version
Form factorATX, Micro-ATX, E-ATX and other sizesMust fit in your case
MemoryType, number of slots and maximum capacityMaximum speed also depends on the processor
PCIe slotsExpansion for GPUs and cardsCheck the version and the number of lanes per slot
M.2 and SATAConnections for fast and ordinary storageSlots sometimes share bandwidth with each other
NetworkType of LAN and Wi-FiFor a server, often faster or dual

Desktop or server?

Server motherboards usually support server processors, more memory and remote management. Desktop motherboards are made for a PC or a home server. See also our article on server CPU or desktop CPU.

A step-by-step plan

Where do you find the real specifications of a motherboard?

A shop page summarises; the manufacturer gives the details. So look up the manufacturer’s product page with the exact model name, and look at the items below.

  1. Specifications or manual: these list the socket, chipset, form factor, memory type and the number of slots.
  2. Supported processors: check whether your exact processor model is on the list and from which BIOS version. In its guide to choosing a motherboard, Intel advises checking that the socket matches the processor and that the chipset supports your processor generation and the features you want.
  3. Memory: the processor determines what is possible, but the motherboard may limit it further. Intel points out that you should check in the manual or with the manufacturer whether a particular memory model works.
  4. Block diagram or lane overview: the manual often shows which slots share bandwidth.

Note down the outcome for each point. That way you can see straight away where a caveat applies. If a point is not in the manual, ask the manufacturer before you buy, especially with a second-hand board.

How many slots do you need, and why can they limit each other?

The form factor says a lot about the number of connections. According to Intel, ATX boards usually have around seven expansion slots and four memory slots, Micro-ATX two full-size PCIe slots and four memory slots, and Mini-ITX one full-size PCIe slot and usually two memory slots. The exact number differs per model.

Form factorPCIe slots (usually)Memory slots (usually)
ATXAround seven expansion slotsFour
Micro-ATXTwo full-size slotsFour
Mini-ITXOne full-size slotUsually two

More slots does not mean everything runs at full speed at the same time. A motherboard can have more PCIe and M.2 slots than the processor and chipset have lanes available. A slot can then fall back to less bandwidth; Intel gives the example of two graphics cards in x16 slots that each run at x8. So check the manual to see how the lanes are divided if you want to fit several fast cards or drives.

With M.2, also pay attention to the slot’s ‘key’ and the type of drive. According to Intel, most M.2 cards use PCIe lanes or SATA, and the key determines whether a card fits.

What mistakes do people often make when choosing a motherboard?

A good approach is to make your list of requirements first (processor, memory, drives, cards) and only then compare boards. Torn between two boards? Put the specification lists side by side on Compare and check the result with the manufacturer. For a new processor, the processor-motherboard check helps with an initial check.

Frequently asked questions

Can I put a new processor on an old motherboard?

Only if the socket and the chipset support that processor. Check the manufacturer’s list; sometimes a BIOS update is needed.

Where can I compare motherboards?

Compare motherboards lists desktop and server motherboards with figures from the manufacturer.

How do I know whether an M.2 drive fits my motherboard?

Look at the slot in the manual: the key, the length and whether the slot supports PCIe or SATA. Compare that with the drive’s specifications.

Further reading

Last updated on

Ask us
Compare Get in touch

Are you sure?