Do You Need 2.5GbE or 10GbE for Your NAS?
Faster network ports can make a NAS faster, but only if the rest of your network plays along.
2.5GbE and 10GbE are faster network connections than the usual 1GbE. They are mainly useful if you regularly move large files or work with several people at the same time. You then also need a suitable switch, cables and a network connection on your computer.
What do 1GbE, 2.5GbE and 10GbE mean?
The number indicates the maximum speed of the network connection in gigabits per second. 1GbE is 1 gigabit, 2.5GbE is 2.5 gigabits and 10GbE is 10 gigabits per second. In practice the usable speed is lower because of overhead and other limitations.
As a rough indication, 1GbE comes to about a hundred megabytes per second in many situations, 2.5GbE to roughly two and a half times as much and 10GbE to about ten times as much. Real values depend on your equipment, the files and the load on the network.
When is 1GbE enough?
For many households a gigabit connection is more than enough. Opening documents, viewing photos and streaming films take little bandwidth. Even a 4K film needs only a fraction of what 1GbE can handle.
It can become a squeeze if you move large amounts of data, such as a first backup of a full laptop, or edit video material directly from the NAS. The connection can also become the limitation if several users read large files at the same time.
When does 2.5GbE help?
2.5GbE is an intermediate step that is already built into many newer computers and motherboards. It often works over existing network cables of sufficient quality, which makes it simple to implement.
It can make sense if your NAS has several hard drives in RAID, which together are faster than a gigabit connection can pass on. With a single hard drive, 10GbE in particular makes little sense, because the drive itself then becomes the limitation. 2.5GbE can still give a gain compared with 1GbE. See also RAID explained for NAS users.
When is 10GbE worth it?
10GbE is meant for heavier uses: video editing from the NAS, large backups, virtual machines or offices with many simultaneous users. You then need more than just a fast NAS.
- A 10GbE port on the NAS (or an expansion card, if the model supports that).
- A network connection of the same speed on your computer.
- A switch that supports the speed.
- Suitable cables, often of a higher category over longer distances, or fibre.
Faster network components also usually use more power and can get warmer. That is something to weigh up.
The whole chain has to play along
Your network is only as fast as its slowest link. A NAS with 10GbE has little effect if your laptop, switch or cable only supports 1GbE. So check:
- The port on your NAS and on your computer.
- Your switch or router: does every port support the speed you need?
- The cables: category and length matter.
- The drives in the NAS: can they deliver the speed as well?
Wi-Fi has other limitations again. You can read more about this in Wi-Fi 6 and Wi-Fi 7 explained. Anyone who wants to invest seriously in speed can also look at SSD storage, see M.2 slots in a NAS.
A worked example from practice
Say you want to copy a folder containing a large amount of holiday videos to your NAS. Over 1GbE that can take hours. Over 2.5GbE the same copy could in theory go well over twice as fast, and over 10GbE much faster still, provided your drives and computer keep up.
That is a one-off action. For daily use, such as opening documents or viewing photos, you notice the difference less. So ask yourself how often you move large files and whether the waiting time really bothers you.
Another option is to grow in steps. For example, first choose a NAS with 2.5GbE, keep the rest of your network simple, and look later at whether an upgrade is needed. Check in the specifications which network ports the model has and whether there is an expansion option.
A short checklist helps with the decision. Ask yourself: how often do I move large files, how many people use the NAS at the same time, and which devices already have a faster network port? Also look at your drives. A single hard drive reaches a limited speed in practice, so 10GbE then adds little extra; 2.5GbE can still make a difference.
For the details, read the specifications of your NAS, your switch and your computer. They often state per port which speed is supported. That way you avoid spending money on a component that the rest of the chain cannot make use of.
Frequently asked questions
Do I need to replace my cables for 2.5GbE?
Often not. 2.5GbE usually works over existing cables of sufficient quality, but that depends on the cable and the length. Check the cable’s specifications.
Does 10GbE make sense at home?
For most households it is not necessary. It can be interesting for anyone who moves a lot of large files, for example when editing video, and is prepared to adapt the whole network chain.
Can I add a fast network card to my NAS?
With some models that is possible via an expansion slot. Not every model offers this option, so check the specifications.
Further reading
Last updated on
