How to Install a NAS: Step-by-Step Overview
From unboxing to your first backup: these are the steps to get a NAS up and running.
You install a NAS by fitting the drives, connecting the device to power and the network, installing the operating software, and then creating a volume, users and shared folders. Finish with updates, security and a backup. The exact steps differ per manufacturer, so follow the manual as well.
Preparation: what do you need?
Before you start, make sure you have everything to hand:
- The NAS and the power cable and network cable supplied with it.
- Compatible drives, see which drives for a NAS.
- A free port on your router or switch.
- A computer on the same network to carry out the installation.
Also think in advance about your RAID choice and your folder structure. Read RAID explained for NAS users if you are still unsure about that.
Steps 1 and 2: fit the drives and connect
Place the drives in the drive bays. On some models this works without tools, on others with screws. Make sure the drives are firmly seated and that the NAS stands securely with enough room for airflow.
Then connect the network cable to your router or switch, and the power supply to the wall socket. A wired connection is more stable than Wi-Fi. Switch the NAS on and wait until it has started up. This can take a few minutes.
Step 3: install the software and find the NAS
You can usually find the NAS through a discovery tool from the manufacturer or via a web address in your browser. You follow the installation wizard, which places the operating system on the drives. Note: this can wipe the drives, so do not use drives with data you want to keep.
Create an administrator account with a strong, unique password. Some systems ask whether you want to update automatically. That is often a good choice, because updates fix security problems.
Steps 4 and 5: volume, users and folders
Create a storage volume with the RAID level you chose. The NAS formats the drives and may then be busy for a while checking or synchronising them. You can often already work in the meantime, but performance is temporarily lower.
Next, create users and set up shared folders. Give each user only the permissions they need. Then connect computers to the shared folders over the network, so you can use them like an ordinary folder.
Step 6: set up security and backup
This is often skipped, but it is important. Turn on two-step verification for the administrator account, disable unnecessary services and only set up access from outside if you really need it. How that can be done safely is covered in accessing your NAS securely from outside your home.
Then set up a backup to an external drive or to another location, and consider snapshots, see snapshots on a NAS explained. You can find a good set-up in NAS backup strategy.
Check and test after installation
Copy a few test files to the NAS and open them from another computer. Test whether a backup is actually made and whether you can restore a file. Check the drive health notifications, and turn on email or push notifications if possible.
After that you can move on to the uses you bought the NAS for. You can read about everything that is possible in what you can do with a NAS.
A practical tip: after installation, note down in a simple document the name of your NAS, the network address, the users you created and the date of the last update. Do not store this only on the NAS itself. That helps you or someone else when something needs to be changed after months.
Also plan a fixed moment, for example every few months, to check for updates and do a restore test. That way your NAS stays a reliable part of your network.
Running into problems, for example because the NAS does not appear on your network? First check the cable and whether the light on the network port is on. Then restart the NAS and your router and search again with the manufacturer’s discovery tool. Many manufacturers also have a support page with common solutions.
If you keep getting stuck, do not leave the installation half finished. A NAS without proper security and without a backup brings more risk than convenience. If necessary, ask someone with experience to look along with you.
Which security settings should you turn on straight after installation?
Synology’s DSM manual lists a few settings you can check straight away. Other manufacturers often have similar options under a different name.
- Firewall: turn it on and use the default profile as a starting point.
- Security scan: let the built-in Security Advisor check your settings and schedule the scan to run periodically.
- Auto block: blocks addresses after too many failed login attempts.
- Two-step verification: asks for a one-time code in addition to your password.
- UPS support: gives the NAS time to shut down normally during a power cut.
- Drive tests: schedule S.M.A.R.T. tests and keep an eye on the temperature.
See the manual for your model for the exact location of these options.
Frequently asked questions
How long does it take to install a NAS?
The physical part is quickly done. The installation and setting up the volume can take longer, and synchronising the drives in the background can take hours to days, depending on size.
Do I need technical knowledge to install a NAS?
Not necessarily. Most manufacturers offer an installation wizard. Basic knowledge of your network does help, and you can follow the manual.
Do I need to configure my router for a NAS?
For use at home, usually not. Access from outside needs extra settings. First read the explanation about arranging access securely.
Do I need a UPS for my NAS?
A UPS gives the NAS time to shut down cleanly during a power cut. Whether that makes sense for you depends on how stable your power supply is and how important the data is. Check in the manual which UPS models your NAS supports.
Further reading
Last updated on
