Overview with affiliate links. We receive a commission if you click through via us. Read how
Compare

How Many Drive Bays Does a NAS Need? How to Decide

The number of drive bays determines how many drives you can use, how you protect them and how much you can expand later.

Blog4 min read

Short answer

How many drive bays you need depends on your storage needs, the protection you want with RAID and the growth you expect. For many home users a model with two or four bays is a logical starting point, but check what the model’s specifications allow.

What is a drive bay?

A drive bay is a slot where you can fit a hard drive or SSD. A NAS with two bays takes two drives, a NAS with four bays takes four, and so on. The number is listed in the model’s specifications and is fixed, unless you connect an expansion unit.

So it is a choice you make at purchase. More bays give room to grow, but the case is also larger and the device usually uses more power.

How much storage space do you need?

Start with your data. Add up what you have now: photos, videos, documents, backups of computers and possibly a film library. Then allow for growth. Anyone who shoots a lot of video will see storage fill up faster than someone who mainly keeps documents.

Also bear in mind that with RAID, part of the drive space goes on protection. Your total drive capacity is therefore not the same as what you can actually use. You can find a tool for estimating your needs in how much storage space do I need.

How many drive bays do you need for RAID?

Your choice of RAID determines the minimum number of drives. As a rule of thumb:

You can read how the different levels work in RAID explained for NAS users.

Should you buy a NAS with extra bays for the future?

That is a trade-off. A model with one or two free bays can be useful if you want to expand later without migrating. Many NAS systems also let you replace drives with larger ones, so that capacity grows step by step.

Even so, you do not need to buy too far ahead. Drives get larger over time, so a model with two or four bays with large drives can be enough for a long time. Do note that expanding an existing RAID set-up differs per manufacturer and per type. Check in the manual whether the system can add drives or only replace them.

Other factors besides the number of bays

Drive bays are not the only thing that counts. Also look at:

Compare different models on the NAS overview page and check the official specifications.

Examples: which situation suits which number of bays?

A few recognisable situations make the choice more concrete. These are examples.

Realise too that a larger NAS usually needs more space on your desk or in your cupboard, and that a larger number of drives means more parts that can fail. So do not automatically choose the biggest model, but the model that suits your use.

One last thought: what happens when your drives fill up? With many systems you can replace drives one by one with larger ones. After the last replacement, the volume grows. This takes time, because each drive has to be rebuilt, but you do not have to start again from scratch.

So put your plans alongside the model’s manual. Some systems let you add drives to an existing volume, others do not. If you know that in advance, you avoid having to move to a new system later. And do not forget that extra storage on the NAS does not give extra protection: a backup in another place is still needed.

Frequently asked questions

Is a NAS with two bays enough?

For many households it can be. Two drives in a mirror protect against the failure of one drive. If you have a lot of data or want more flexibility, a model with four bays may suit better.

Can I add drive bays later?

Not on the NAS itself. Some models do support an expansion unit. Check in the specifications whether your model can do this.

Do I have to fill all the bays straight away?

No. You can start small and add drives later, if the RAID set-up and the model allow it. Check this beforehand in the manual.

Further reading

Last updated on

Ask us
Compare Get in touch

Are you sure?